Filter
Top Products
34
Basic
Create a VLAN and add tagged member ports to it.
1. From the main menu, click administrator-> VLAN
configuration, click Add then you will see the page as
follow.
2. Type a name for the new VLAN.
3. Type a VID (between 2-4094). The default is 1.
4. Choose the protocol type.
5. From the Available ports box, select ports to add to the
VLAN and click “Add >>”. If the trunk group exists, you
can see it here (ex: TRK1,TRK2…), and you can configure
it as the member of the VLAN or not.
6. Click Next. Then you can view the page as follow.
7. Use this page to set the outgoing frames as VLAN-Tagged
frames or no. Then click Apply.
Tag: outgoing frames with VLAN-Tagged.
Untag: outgoing frames without VLAN-Tagged.