Filter
Top Products
60
2-8 WPS Configuration
Wi-Fi Protected Setup (WPS) is the latest wireless network
technology which makes wireless network setup become very
simple. If you have WPS-enabled wireless access point, and you
want to establish a secure connection to it, you don’t have to
configure the wireless access point and setup data encryption. All
you have to do is go to the WPS setup page of this wireless card,
click a button, and then press a specific button on the wireless
access point you wish to establish a secure connection - just three
simple steps!
For older wireless access points, it’s possible to perform a firmware
upgrade to become a WPS-enabled access point. Since they may
not have a hardware button to press for WPS setup, you can use
an alternative WPS setup method – input the pin code. Every
WPS-compatible wireless network card comes with a unique WPS
pin code; you can just input the code to wireless access point, and
the wireless access point and wireless network card will do the rest
for you.
This wireless network card is compatible with WPS. To use this
function, the wireless access point you wish to connect to must
support WPS function too. Now, please follow the following
instructions to establish secure connection between WPS-enabled
wireless access point and your wireless network card: