Filter
Top Products
2. Hardware Installation
1. Unpack the print server package and check all the items listed
in section 1.3.
2. Connect the print server to the printer you want to share on
the network
z For direct attach models, plug the print server directly
to the printer’s centronics port.
z For palmtop/desktop models, connect the printer to
print server by the standard printer cable.
3. Connect the power adapter to the print server.
4. The print server will perform the Power-On-Self-Test (POST)
after it is powered on. The Status LED will flash 6 times to
indicate that the print server is ready.
NOTE1: MUST use the power adapter shipped with the print server, do
NOT use any other power adapter from any sources.
NOTE2: To prevent the compatibility problem between PrintSir and a few
printers, it is recommend that you power on the PrintSir before
the printer.
17