Filter
Top Products
DIVA T/A ISDN Modem Reference Guide
◆
Page 62
Mini-monitor Commands
The following commands relate to the Mini-monitor. They are all case sensitive.
Your Eicon Technology Customer Services representative may ask you to use these commands.
at@dump
Dump Memory.
Produces a memory dump using XMODEM.
Note: This command needs a terminal emulation program that supports XMODEM.
at@d1
DRAM test
.
at@d2
Flash test
.
at@d3
ISDN internal loop back test
.
at@d4
ISDN external loop back test
.
at@fail
Simulate a fault
.
at@load
Load New Firmware
.
Note: This command needs a terminal emulation program that supports XMODEM or
1K-XMODEM.
at@md arg
Display memory
(arg= “address:size”).
at@msg
Display cause for entering the monitor
.
at@quit
Exit the Mini-monitor
.
at>F
Restore All Profiles to Original Factory Settings
. Reverts the powerup profile to
number 0.
Warning: All previous user-defined settings are lost.