Eiki LC-SD10 Projector User Manual


 
21
Basic Operation
Message disappears after 4 seconds.
Press P-Timer button on the remote control. The timer display “00 :
00” appears on the screen and the timer starts to count time (00 : 00
~ 59 : 59).
To stop P-Timer display, press the P-TIMER button. And then, press
P-TIMER button again to cancel P-Timer function.
1
2
Press MENU button to display the On-Screen Menu. Press Point
78buttons to move the red frame pointer to SOUND Menu
icon.
Volume
Press VOLUME (+/–) button on the remote control or on the top
control to adjust volume. The volume dialog box appears on the
screen for a few seconds.
VOLUME (+) button to increase volume, and VOLUME (–) button for
decreasing.
Mute
Press MUTE button on the remote control to cut off sound. To
restore sound to its previous level, press MUTE button again or press
Volume (+/–).
To increase volume, press Point 8 button, and press Point 7 button to
decrease volume.
Press Point 78 buttons to mute sound. Dialog box display is changed
to “On” and sound is muted. To restore sound to its previous level,
press Point
78buttons again.
Press Point d button to move the red frame pointer to the item
that you want to select, and then press SELECT button.
Indicates approximate
level of volume.
Close Sound Menu.
Direct Operation
Menu Operation
Volume
Mute
Indicates approximate
level of volume.
The display disappears after 4 seconds.
SOUND MENU
Sound Menu icon
Sound Adjustment
P-Timer Function
No Show Function
Press MUTE button to set
Mute function On or Off.
Press NO SHOW button on the remote control to black out the image.
To restore to normal, press the NO SHOW button again or press any
other button. When a projected image is captured and set as “User”
in the Logo item in the Setting menu (
P36 ), the screen changes
each time you press the NO SHOW button as follows :
black out the captured image normal
......