Eiki LC-XNB3 Network Card User Manual


 
9
PREPARATION
POSITIONING PROJECTOR
This projector is designed to project on a flat projection surface.
The projector can be focused from 5.3(1.6m) ~ 40.0(12.2m).
Refer to the figure below to adjust a screen size.
Screen Size
(W x H) mm
Height (H1)
40
Height (H2)
812.8 x 609.6
21.6(548.64mm)
2.4(60.96mm)
100
2032 x 1524
54(1371.6mm)
6(152.4mm)
150
3048 x 2286
81(2057.4mm)
9(228.6mm)
200
4064 x 3048
108(2743.2mm)
12(304.8mm)
300
6096 x 4572
162(4114.8mm)
18(457.2mm)
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating
ADJUSTABLE FEET. Projection angle can be adjusted to 15.6
degrees.
Lift the front of a projector and pull FEET LOCK LATCHES
on the both sides of a projector.
1
ADJUSTABLE FEET
FEET LOCK
LATCHES
40”
100”
150”
200”
300”
230”
153”
115”
77”
31”
H1
H2
40.0 (12.2m)
26.6 (8.1m)
20.0 (6.1m)
13.1 (4.0m)
5.3 (1.6m)
Release FEET LOCK LATCHES to lock ADJUSTABLE FEET
and rotate ADJUSTABLE FEET to fine tune position and tilt.
2
To retract ADJUSTABLE FEET, lift the front of a projector
and pull and undo FEET LOCK LATCHES.
Keystone distortion of a projected image can be adjusted by
Menu Operation. (Refer to P20 and 35.)
3
ROOM LIGHT
The brightness in a room has a great influence on
picture quality. It is recommended to limit
ambient lighting in order to provide the best
image.
Max. Zoom
Min. Zoom
CAUTION
Avoid positioning a projector with the angle of more than 20
degrees. Projection Lamp may malfunction.
31
629.9 x 472.4
16.7(425.16mm)
1.9(47.24mm)