Filter
Top Products
English
3
Introduction
Memory Viewer function
The Memory Viewer function is to make a presentation or project an image without using
computers or some other external equipment. You do not have to carry a computer or other
equipment to project.
Store presentation data or images on a dedicated USB memory and insert it into the USB
terminal of the projector, then you can project these images.
This projector is also equipped with dedicated Slide Converter software to edit the presentation
images to project with the Memory Viewer function. With this function, you can edit images,
photo data, or PowerPoint data into a more effective presentation data.
Which images can project with the Memory Viewer function?
With the Memory Viewer function, you can project images in these formats below.
•
Edited data with Slide Converter (Index data)
•
Bitmap data
•
JPEG data
*Some data may not be projected even with these format.
USB memory for the Memory Viewer function
Use the optionally available USB memory (WL-10). If you use other product, the projector may
not work properly.
The USB memory is dedicated for our company's projectors. We cannot guarantee for using
with other projectors.
Back up the data
It is recommended that important data to edit with Slide Converter and store in USB memory is
to be stored in other media in advance. We will not hold any responsibility for data loss or
damage resulting from using the Memory Viewer function.
Trademarks
Microsoft, Windows, and PowerPoint are either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries. Each name of corporation or product in this owner's manual is
either a registered trademark or a trademark of its respective corporation.
• The On-Screen Menu and figures in this manual may differ slightly from the product.
• The contents of this manual are subject to change without notice.