Filter
Top Products
Focus
Adjust the focus of the object.
■ Auto Focus
Press the auto focus button [AF] on the front panel or
the wireless remote control, to activate the auto focus.
While the auto-focus is in operation, the indicator
lamp on the front panel blinks until the object is
brought into focus.
This product features a one-push auto focus function.
Once focusing is completed, the auto focus function is
released, and the focused position maintains
unchanged (FOCUSFREE).
The objects listed below may not be brought into
focus in the auto focus mode. In these cases, use
the manual focus mode.
• Objects bearing little contrast
• Objects with fine repeated patterns, such as
lateral stripes and cross stripes
• Objects glittering or reflecting strong light
• Objects with bright background, or excessive
contrast
• The whole image is dark.
• Objects located near and far at the same time
• Objects in motion
The auto focus function will be canceled if the manual
focus button
[FOCUS
.
NEAR] or [FOCUS
.
FAR] on
the wireless remote control is pressed.
The auto focus function works up to a height of
approx. 10cm (3.9 in) above the stage surface
when the zoom button
[TELE] is set to the
maximum.
PAU S E
2x
SET
PRESET
LIVE
MEMORY
CALL
SET
IMAGE
CALL
LAMP
POSI/NEGA COLOR/B&W
UPPER BASE
IRIS
AF
NORMAL OPEN CLOSE
TELE
ZOOM
WIDE
NEAR
FOCUS
FAR
RGB1 RGB2MAIN
MONITOR
OUTPUT
MONITOR OUTPUT
PAUSE
F.A.M.
MAIN
RGB1
RGB2
IRIS
OPEN CLOSE
ZOOM
TELE
WIDE
POSI / NEGA
IMAGE ROTATION
AUTO/MANUAL
CONTRAST
WHITE
BALANCE
LAMP
UPPER / BASE / OFF
AF
ZOOM
TELE
WIDE
O
NTRAST
WHITE
BALANCE
AF
IRIS
AF
NORMAL OPEN CLOSE
TELE
ZOOM
WIDE
NEAR
FOCUS
FAR
1
2
3
4
5
6
7
8
9
10
11
31
Front operation panel
Wireless remote control
Front operation panel
Wireless remote control