Filter
Top Products
20
Monitor output : When MAIN is selected
Monitor output :
When RGB1/RGB2 is selected
Monitor output : When MAIN is selected
Monitor output :
When RGB1/RGB2 is selected
Monitor output : When MAIN is selected
Monitor output :
When RGB1/RGB2 is selected
Input selection
MAIN
Input selection
RGB1
Input selection
RGB2
RGB output terminal
Main camera input image
Main camera input image
RGB1 input image
RGB1 input image
RGB2 input image
RGB2 input image
Input
Output signal
Composite output terminal
Main camera input image
Main camera input image *
Main camera input image
RGB1 input image
Main camera input image
RGB2 input image
S-video terminal
Main camera input image
Main camera input image *
Main camera input image
RGB1 input image
Main camera video
RGB2 input image
Note: *When the input selection is the built-in camera (MAIN), RGB1/RGB2 cannot be selected for the monitor
output.
Monitor output
The signal to be outputted to the NTSC/PAL monitor is selected.
When the input has been set to RGB1 or RGB2 and the monitor
output button [RGB1/RGB2] on the front operation panel is
pressed, the indicator lamp is switched accordingly, and the
images by the equipment connected to the external input
terminals [RGB1] and [RGB2] are presented on the NTSC/PAL
monitor.
The signals to be outputted are as shown in Table below on the
next page.
When the built-in camera button [MAIN] in the monitor output
on the front operation panel is pressed, the indicator lamp is
switched accordingly, and the image by the built-in camera is
displayed on the NTSC/PAL monitor.
Notes: - When the built-in camera button [MAIN] in the input
selection on the front operation panel or wireless
remote control is pressed, the image by the built-in
camera is resumed.
- Of all signals inputted into the external input terminals
[RGB1] and [RGB2], those signals having the
frequencies as specified in the following page can be
outputted to the NTSC/PAL monitor.
Front operation panel
Table of video-in/out terminal selections