Filter
Top Products
3-18 User Guide
OSD Control Options
Control Description
Brightness
Increases or decreases brightness
Contrast
Increases or decreases contrast
H-Position
Moves the screen left or right
V-Position
Moves the screen up or down
Phase
Increases or decreases the snow noise of the image after auto
adjustment is made.
Clock
The dot clock is fine-adjusted after auto adjust.
OSD H-Position
Moves the OSD position horizontally on the screen. When the +
button is pressed, the OSD control menu will move to the right
side of the screen. Likewise, when the - button is pressed, the
OSD control menu will move to the left side.
OSD V-Position
Moves the OSD position vertically on the screen. When the +
button is pressed, the OSD control menu will move to the top side
of the screen. Likewise, when the - button is pressed, the OSD
control menu will move to the lower side.
Color Balance
Press + or - to select C1/9300, C2/6500 and USER. Only when
selecting USER can you make adjustments to the R/G/B content.
Press Enter to restore to factory default setting.
Auto-Adjust
Press Auto to enable this function. The Auto-Adjust will
automatically adjust V-Position, H-Position, Clock and
Clock-Phase. This adjustment takes about 5 seconds.
Recall Defaults
Returns the monitor to its default settings.
OSD Language
Select from English, French, Italian, German and Spanish.
Information
Indicates the current resolution, H-Frequency and V-Frequency.