Filter
Top Products
SHOCK HAZARD WARNING:
The printer and power supply should never be operated in a
location where either one can get wet. Personal injury could
result.
MEDIA WARNING:
Always use high quality approved labels, tags and transfer
ribbons. If adhesive backed labels are used that DO NOT lay flat
on the backing liner, the exposed edges may stick to the label
guides and rollers inside the printer, causing the label to peel
off from the liner and jam the printer. Approved supplies can be
ordered from your dealer.
RELOADING HINT:
If you should run out of labels while printing, DO NOT turn the
power switch OFF (0) while reloading or data loss may result.
The printer will automatically a new label roll is loaded.
STATIC DISCHARGE:
The discharge of electrostatic energy that accumulates on the
surface of the human body or other surfaces can damage or
destroy the print head or electronic components used in this
device.
DO NOT TOUCH the print head or the electronic components
under the top cover.
THERMAL PRINTING:
The print head becomes hot while printing. To protect from
damaging the print head and risk of personal injury, avoid
touching the print head. Use only the cleaning pen to perform
maintenance.
iv 980346-001 Rev. A