Filter
Top Products
17
OSD Function Description
Under Analog RGB Display
Item Function
Brightness To increase or decrease the brightness.
Contrast To increase or decrease the contrast.
Frequency To adjust frequency (dot clock).
Phase To adjust phase (clock-phase).
Vertical. To move the screen upward or downward
Horizontal To move the screen left or right.
OSD Hor Pos To move OSD menu left or right.
OSD Ver Pos To move OSD menu upward or downward.
OSD Background Choose between Opaque and Translucent.
User Timeout Set OSD screen appearing time.
Color Temp Choose between Default, System1, Sytem2, Sytem3, System4 for
color temp.
Red Balance Red.
Green Balance Green.
Blue Balance Blue.
DPMS Enable or Disable DPMS.
Auto Source Select Enable or disable auto source selection.
Freeze Frame Enable or disable freeze frame.
Zoom Enable zoom-in function.
Scale Mode Choose scale mode between “Fill Screen”, “Aspect Ratio”, “One to
One”
Input Source Select Choose input source between “Analog RGB”, “Composite Video”,
“Super Video”
Auto Adjust Press + to turn on this function. The Auto-Adjust will automatically
adjust V-Position, H-Position, Frequency, Clock-Phase. The whole
process takes about 5 seconds. (Please use the test pattern file in the
attached LCD monitor utility disk for Auto Adjust)
Factory Reset Set to factory default.
Information Display information on resolution, refresh rate and input mode.