Filter
Top Products
2-2 7000 & 4000 Series ATSs Connectivity Module
Device Configurator Screen for 7000 & 4000 Series ATSs with a PM or DPM
If a Power Manager (PM) or Digital Power Meter (DPM) is used with a 7000 & 4000 Series ATS, a button appears
on the lower left corner of the Connectivity Module Device Configurator screen. Press the Config PM button to
display the Power Manager or Power Meter Configuration screen (right side).
Power Manager or Power Meter Configuration
Enter or change the PM or DPM Name (8 char. max.) and Location (20 char. max.). Several configuration settings
must be set appropriately. Press the Update button when finished to save the PM or DPM configuration changes.
Input Name & Output Names (Power Manager only)
For a Power Manager, press the Config I/O Name button to display the Input Name and Output Name screen.
Enter or change the names (16 char. max.) of the inputs and outputs. Press the Update button when finished to save.
Input names
Input & Output Names (PM only) PM or DPM Configuration
Press Update button when
finished to save the names.
Press Update button when
finished to save the configuration
Press Config I/O Name button to
display Input & Output Names screen.
Press To PM Config button to return to
Power Manager Configuration screen.
Output names
Power Manager
name
Power Manager
location
NOTE
Update the PM, DPM, or Group 5
Controller first
if you need to update
the server. Do not close the browser
during the updating process. The
PM, DPM, or CP update request will
be discarded if the browser is closed.
Power Manager
Power Meter
Power Meter
name
Power Meter
location
Press Update button when
finished to save the configuration