Filter
Top Products
Major Components
9
Figure 3 Internal battery pack with connector
3.3 Removable Power Distribution Box
The UPS incorporates a power distribution box that must be installed before the unit is placed into
service. The power distribution box provides the benefits of plug and receptacle convenience with a
manual bypass switch. For installation instructions, see 5.4 - Connect Input/Output Power.
Optional versions may be available to replace the standard box for custom installations.
Figure 4 Optional power distribution—PD-L630
OUTPUT
BREAKER
20A 240V~/T
OUTPUT
BREAKER
20A 240V~/T
ON
ON
INPPUT
OUTPUT ONLY CB DOES NOT
CONNECT BYPASS POWER TO
MANUAL BYPASS SWITCH.
BREAKER 30A
ON
OFF
OFF
OFF
UPS
UTILITY
MAITANENCE BYPASS
AVAILABLE
UPS
AVAILABLE
CONNECTOR PROTECTIVE COVER DO NOT REMOVE SCREWS
PRIOR TO INSTALLATION OF BOX ON UPS
-LOOSEN THREE SCREWS 1 TURN
- SLIDE COVER TO EXPOSE CONNECTOR
-TIGHTEN SCREWS GENTLY
UPON REMOVAL OF BOX FROM UPS
-LOOSEN THREE SCREWS 1 TURN
-SLIDE COVER TO REACH END SCREW AND COVER COMMUNICATION
-TIGHTEN SCREWS GENTLY
Manual
Bypass
Switch
Wired
connections
to UPS
DISCONTINUED
PRODUCT