Filter
Top Products
5–14 Maintenance and Service Guide
Removal and Replacement Procedures
✎
Before installing the palm rest on TouchPad models, make sure
the TouchPad
1
and RTC battery cables
2
are routed through the
respective notches in the palm rest (Figure 5-11).
Figure 5-11. Routing the RTC Battery and TouchPad Cables
5.6 Memory Expansion Board
✎
The Compaq Evo Notebook N410c notebook has two memory
expansion slots: one is located on the bottom of the notebook and
the other is located under the palm rest. The procedure for
removing a memory expansion board from a memory expansion
socket is identical for both locations.
Follow these steps to remove a memory expansion board from the
slot in the bottom of the notebook:
1. Prepare the notebook for disassembly (Section 5.3).
2. Turn the notebook bottom side up with the front facing
forward.