Filter
Top Products
1592028150 XWEB300D_500_500D stp GB r2.1 2012.06.22.doc
X
W
EB50
0
21
/
23
ALWAYS: ask qualified personnel for the router installation by using this
information.
Used ports that are mapped to the LAN side:
80 (used for the HTTP access)
22 (used for SSH connection)
While the ports on the WAN side are:
Telnet (to configure the router from a remote, also via Internet).
HTTP (To access the XWEB 500).
If working with the router GATEWAY and DNS check your Internet contract
details. Depending on your network topology you may need a reverse NAT on
port 80. It is not enough to link port 80 on the router side to port 80 on
intranet side. Some firewall or Router need also the reverse NAT.