Filter
Top Products
Command Reference Guide 13
Set Privilege Password
Change the password a user must enter in order to use privileged
commands.
>
Server>> set server privilege password
“password”
“password” Enter from 1 to 16 characters, enclosed in
quotes. Default is System. This produces the
same result as using the SU (super user)
command.
Change Login Password
Specify the password users must enter at login to the printer server.
>
Server>> [set |define |change] server login
password “pass_txt”
“pass_txt” Enter a password containing 1 to 16 characters,
starting with an alphabetic character and
enclosed in quotation marks. The default is
Access.
Remote Console Password
Specify the password that must be entered by remote console operators
to gain access to the printer server’s remote port.
>
Server>> [set |define |change] server
maintenance password “pass_txt”
“pass_txt” Enter a password containing 0 to 16
hexadecimal characters (0-9 and A-F) enclosed
in quotes. A password of “0” means that no
password is required. Default is no password.