Filter
Top Products
Command Description
The following session introduces the command structure of the command
line interface.
Command groups:
System - System commands
Console - Console commands
Port - Port commands
VLAN - VLAN commands
Aggr - Aggregation commands
QoS - QoS commands
Mirror - Mirror commands
IP - IP commands
SNMP - SNMP commands
Ratelimit - Rate setup commands
Exit - Logout commands
System Commands
Commands at System level:
System Configuration [all]
System Restore Default [keepIP]
System UserName [<name>]
System Password [<password>]
System Systemname [<name>]
System Reboot
System Configuration [all]
Syntax:
System Configuration [all]
Description:
Show system name, username, password, software version and
management MAC address. Optionally show the full configuration
[all]: Show the total switch configuration (default: System configuration
only)
System Restore Default [keepIP]
Description:
Restore factory default configuration.
[keepIP]: Preserve IP configuration (default: Not preserved).
UserName [<name>]
Description:
34
Set or show the user name.