Filter
Top Products
23
23
4.1.2. PPPoE (Point-to-Point Protocol over Ethernet)
The WAN interface can be configured as PPPoE. This type of connection is usually used for a DSL service and requires a
username and password to connect.
Address Mode: PPPoE can be used with a dynamic or static IP address. If you select the Dynamic IP radio button, then the IIP
address in the next field is not required. However, if you select the Static IP radio button, then the IP address in the next field is
required.
IP Address: specify the IP address if required.
User Name: Specify the user name which is provided by your ISP.
Password: Specify the password which is provided by your ISP, and then verify it once again in the next field.
Verify Password: enter the password again for verification
Service Name: Specify the name of the ISP.
Reconnect Mode:
o Keep Connection: choose this option if you want a continuous connection.