EnGenius Technologies ESR9855G Network Router User Manual


 
70
70
6.3.6. Routing
This section adds a new entry into the routing table.
Enable: Check this box to enable the routing table entry.
Name: Specify a name for the rule.
Destination IP: Specify the destination IP address.
Netmask: Specify the subnet mask for the IP address.
Gateway: Specify the IP address of the gateway.
Metric: Specify the number of routing hops. The route metric is a value from 1 to 16 that indicates the cost of using this route. A value
of 1 is the lowest cost, and 15 is the highest cost. A value of 16 indicates that the route is not reachable from this router. When trying
to reach a particular destination, computers on your network will select the best route, ignoring unreachable routes.
Interface: Select the interface from the drop-down list.
Click on the Save button to insert the entry into the Routing table.