Support User Manuals

Enterasys Networks 4G4282-49 Switch User Manual

Open as PDF

of 90

Completing the Installation

3-32 Installation

Logging in with an Administratively-Configured User Account

Ifthedevice’sdefaultuseraccountsettingshavebeenchanged,proceedasfollows:

1. Attheloginprompt,enteryouradministratively‐assignedusernameandpressEnter.

2. AtthePasswordprompt,enteryourpasswordandpressEnter.

ThenoticeofauthorizationandtheMatrixpromptdisplaysasshownbackinFigure 3 ‐18.

TheDFE‐Goldmoduleisnowreadytobeconfigured.ForinformationaboutsettingtheIP

addressandconfiguringTelnetsettingsforremoteaccesstoDFEmanagement,referto

Chapter3intheMatrix DFE‐GoldSeriesConfigurationGuide.TheCLIcommandsenable

youtoinitiallysetupandperformmore

involvedmanagementconfigurations.

TheMatrix DFE‐GoldSeriesConfigurationGuideisavailableonlineat:

http://www.enterasys.com/support/manuals

Ifyourequireassistance,contactEnterasysNetworksusingoneofthemethodsdescribed

in“GettingHelp”onpage 1‐8.

Note: Users with Read-Write (rw) and Read-Only access can use the set password

command to change their own passwords. Administrators with Super User (su) access

can use the set system login command to create and change user accounts, and the set

password command to change any local account password. For information on the set

password and set system login commands, refer to Chapter 3 in the Matrix DFE-Gold

Series Configuration Guide

.

previous next