Enterasys Networks 6H352-25 Switch User Manual


 
About This Guide xi
About This Guide
Welcome to the 6H352-25 Fast Ethernet Installation Guide. This guide describes the 6H352-25
module and provides information concerning network requirements, installation, and
troubleshooting. For information about how to use Local Management to configure and manage
the 6H352-25, refer to the Enterasys Networks MATRIX E7 Series and SmartSwitch 6000 Series
Modules Local Management User’s Guide.
USING THIS GUIDE
Read through this guide to completely understand the 6H352-25 capabilities and how to install the
modules.
A general working knowledge of Ethernet and IEEE 802.3 type data communications networks
and their physical layer components is helpful when using this module.
Important Notice
Depending on the firmware version used in the 6H352-25, some features described in this
document may not be supported. Refer to the Release Notes shipped with the 6H352-25 to
determine which features are supported.
NOTE: In this document, the 6H352-25 is also referred to as the “module”; the
MATRIX E7 (6C107) chassis as the "MATRIX E7"; and the SmartSwitch 6000 (6C105)
chassis as the "SmartSwitch 6000".