Filter
Top Products
Using the RESET Button
4-8 Troubleshooting
To reset the 6H352-25, press and release the RESET button. The 6H352-25 goes through a reset
process for approximately 60 seconds. Additional downtime may result as the module reenters the
network.
NOTE: Pressing the RESET button while the 6H352-25 is already in reset mode is not
recommended. If the RESET button is pressed while the 6H352-25 is in reset mode, the
module will enter an extended diagnostic procedure, which is unnecessary for normal
operation. This extended diagnostic procedure takes longer than one minute to
complete.