Epson 1000 Printer User Manual


 
7.
Next you reset the TONER setting. Three messages flash in
rotation on the display:
NEW CARTRIDGE?
YES, PRESS RESET
NO, PRESS CONTINUE.
8.
Press
RESET
to change the
TONER
setting to full.
9.
Gently press down on the printer cover until it clicks shut.
Please note: If you replace the cartridge when more than 20%
toner is left, the three rotating messages do not appear. Instead
COVER OPEN E**
F (two
or more asterisks) appears. Use the
SelecType Level 2 TONER option to change the TONER setting
to full.
If you do not change the TONER setting to full after replacing
the imaging cartridge, the TONER message indicates the wrong
amount of toner left.
Also NEW CARTRIDGE?
appears even if
the toner level is full.
Note:
Each time you
replace
the imaging cartridge, you should print a
feature print to be sure the print quality is satisfactory and that you
installed the cartridge properly. See “Test printing” earlier in this
guide.
14 Maintenance