Filter
Top Products
4
Attaching the power cord
1.
Make sure the power switch at the top right of the printer is
turned off.
2. Insert the power cord into the back of the printer. Then plug
the other end into a properly grounded outlet.
5
Test printing
1.
2.
3.
4.
5.
Make sure the imaging cartridge is installed. Turn on the
printer. Several messages appear as the printer performs
internal tests. After about 35 seconds, the
READY
message
appears.
Press the
LEVEL 2
button to enter SelecType Level 2.
Press
‘I
until
FEATURE PRINT
appears on the display.
Press
)
twice holding down the button until the display
begins to flash to print the feature print.
After the feature print is complete, press the EXIT button to
exit SelecType.