Epson 1735W Projector User Manual


 
List of Functions
54
f When WEP is selected
Sub Menu Function
WEP encryption You can set the encryption for WEP encoding.
128 bit: Uses 128 (104) bit encoding
64 bit: Uses 64 (40) bit encoding
Format You can set the input method for the WEP encrypted key.
ASCII: Input text. The method of inputting the encrypted WEP with text differs depending on the access point. Check with the network
administrator for the network in which the projector participates, and then set to "ASCII".
HEX: Input in hexadecimal.
Key ID Selects the WEP encryption ID key.
Encrypted key 1/
Encrypted key 2/
Encrypted key 3/
Encrypted key 4
You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for
the network in which the projector participates. The type of character and the number that can be entered differ according to the "WEP
Encryption" and "Format" settings.
If the number of characters you enter is shorter than the required character length, no character is encrypted. If the number of characters you enter
is longer than the required character length, characters that exceed the permitted number are not encrypted.
"128 bit" - "ASCII": Single-byte alphanumerics, 13 characters.
"64 bit" - "ASCII": Single-byte alphanumerics, 5 characters.
"128 bit" - "HEX": 0 to 9 and A to F, 26 characters
"64 bit" - "HEX": 0 to 9 and A to F, 10 characters