Filter
Top Products
Switching Between Continuous Paper and Single Sheets
CAUTION: If you lower the paper-release lever while
continuous paper is still loaded, the printer beeps and the
READY
light goes off. If this happens, raise the paper-
release lever and press the
FORM FEED
and
FONT
buttons at
the same time to reverse the paper to the paper-park
position. You can then lower the lever again.
3.
The printer is ready to print. When it receives data, it
automatically loads a single sheet from the paper cassette and
begins to print.
Switching to continuous paper
To switch from single sheets back to continuous paper, follow these
steps:
1.
If a single sheet is in the paper path, press the
FORM FEED
button
to eject it.
2.
Raise the paper-release lever to the push-tractor position.
3.
The printer is ready. When the printer receives data, it loads
continuous paper from the push tractor automatically and
begins to print.
2-14
Paper Handling