Filter
Top Products
R4CD380/E850
Unpacking and Setup Guide
Rev.C
ENGLISH.FM A4 size
4/6/05
R
Proof Sign-off:
KOW M.Arai K.Nishi
K.Nishi
NOC K.Lee
9
English
4. Fasten the bottom of the printer and base unit
with wing nut, spring washers, and washers
(H).
5. Release the front casters and the stabilizer
knobs and move the printer to the place of use
(a short distance away). Lock the casters and
extend the stabilizer knobs after moving.
6. Remove the protective tapes.
7. Open the front cover. Remove the protective
screw (L) and metal plate (M) from the side of
the print head compartment. (Follow the red
wire (N) fixed on the cover of the printer and
you can see the screw at the edge of the wire.)
c
Caution:
Watch your fingers when opening and
closing the front cover.
Note:
Do not re-install the screw and the metal plate.
Store them separately to avoid losing them.
8. Close the front cover.
Attaching the Paper Basket
1. Fully insert and attach the upper basket hooks
(D) to the upper guides of the base upright left
and right.
a: from the front cover
b: from the ink compartment cover
C: from the maintenance tank
H
a
b
C
L: Protective screw
M: Protective metal plate
N: Red wire
L
M
N
D