Filter
Top Products
R4CD380/E850
Unpacking and Setup Guide
Rev.C
ENGLISH.FM A4 size
4/6/05
R
Proof Sign-off:
KOW M.Arai K.Nishi
K.Nishi
NOC K.Lee
5
English
Checking the Contents Unpacking and Assembling
EPSON Stylus Pro 9800/9400
Choosing a Place for the Printer
❏ Leave adequate room for easy operation,
maintenance, and ventilation as shown below.
(Values in the illustration below are the
minimum.)
❏ Leave at least 30 cm between the back of the
printer and the wall.
❏ Choose a location that can hold the printer
weight (about 90 kg with base unit).
❏ Make sure the surface is flat and stable.
❏ Use a grounded power outlet; do not use a
damaged or frayed power cord. Avoid using
an outlet that is shared with other appliances.
❏ Use only an outlet that meets the power
requirements of this printer.
❏ Operate the printer under the following
conditions:
❏ Avoid locations that are subject to direct
sunlight, excessive heat, moisture, or dust.
❏ Do not block the ventilation openings.
A: Power cord
B: Roll paper spindle with the roll paper
C: Ink cartridges
D: Roll paper belt
E: Gray attachments
F: Paper guides
G: Black Ink Conversion Kit
A
B
C
D
E
F
G
For EPSON Stylus Pro 9800/9400 only
For EPSON Stylus Pro 7800/7400 only
For EPSON Stylus Pro 9800/7800 only
Temperature: 10 to 35ºC
Humidity: 20 to 80% without condensation