Filter
Top Products
16 Setting Up the Printer
6. Place the scanner onto the cabinet in the direction shown
below.
Setting Up the Printer
To prepare the printer for use with the copy station, you need to
install the printer interface board, ROM module, and large
capacity paper unit or 500-sheet paper cassette unit, then place
the printer into the cabinet. Follow the steps in this section.
w
Warning:
Be careful when working inside the printer as some components
are sharp and may cause injury.
c
Caution:
Before you install the modules, be sure to discharge any static
electricity by touching a grounded piece of metal. Otherwise, you
may damage static-sensitive components.