Filter
Top Products
Sawgrass Technologies, Inc. ChromaBlast
™
Getting Started Guide for the EPSON Stylus C120/C110
23
Printing and Heat Transfer Instructions
RECOMMENDED APPLICATIONS
White or light-colored fabrics in 100% cotton.
PRINTING
Print using the supplied ChromaBlast Driver program only.
The print side of ChromaBlast media is opposite the ChromaBlast logo.
For the Epson C120, place print side face up in the printer tray.
Mirror Image: Check this box in the ChromaBlast Driver to ensure the
image prints in reverse and that text appears correctly when image is
transferred. If your image is already reversed in your graphic program,
leave this box unchecked.
TRANSFERRING THE IMAGE USING A COMMERCIAL HEAT PRESS
1. If desired, you may trim the non-printed area before transferring,
leaving .25 in. margin around the printed area.
2. Place garment on the heat press. Cover with ChromaBlast paper
with image face down.
3. Press image according to proper pressure, heat, and time
settings.
4. Peel the paper off the shirt while the shirt is still hot using an
even motion.
5. Stretch the image area while the shirt is hot from both left to right
and top to bottom to reduce the hand.
HEAT PRESS SETTINGS
Pressure: Heavy. If using a pneumatic press, set the pressure to 60
psi.
Temperature and Time: 350°F (176°C) for 45-60 seconds.
Due to variations in cotton garments and in heat presses, time and
temperature can be adjusted for preferred performance up to 400°F for
25 seconds. Some scorching may occur, but will wash out.
STORAGE INSTRUCTIONS
Store ChromaBlast media in a cool, dry area within the provided plastic
storage bag. Do not remove from carton until ready to use.