Filter
Top Products
2) Set up the Continuous Ink Supply System
Press the “ink cartridge replace
Move the cartridge car Uplug the power connector
Button” to cartridge remove position
Open the cartridge cover to use a small screwdriver to loosen Circumgyrate the screwdriver clockwise
certain angle the cartridge cover, then remove the cartridge cover.
Remove the original cartridges Insert our no-sponge cartridge into printer carefully
3) Fix supporting arm
Tear off the sticker, and place one on the inner side of printer, and place another small tube clip on the right
side of printer, as above picture shown.
4)Install the tubing.
Put the tube into the Support Arm and Small Tube clamp as the below picture shown.