Filter
Top Products
Normal
Nozzle check is normal, start printing
Abnormal
Pls clean printing head
进入打印机喷嘴检查选项
Enter in the Printer Services panel and print a Demo Page.
If there shows any breaks (maybe it caused by air bubbles in the printing head), please
clean your printing head. If it is still shown little breaks, especially only for one color, it is
unnecessary to repeatedly clean printer-head. Just keep the printer unuse for about one
hour and print a Demo Page again. If it is still abnormal, please kindly contact local dealer.
4、Auto Reset Procedure
Ink indicator light sparkling, Till the Demo Page appear “X”,
but it still can work. which indicates to replace the cartridges
There are two Cartridge reset method:
1. Click “How to”, and follow up the info, till “OK” finished.
2. Push the button with red light directly on the left side of printer for
one time, when cartridges move, press that button again. Then
you will see the cartridge with full ink again.
5. Add ink into the reservoir bottles.
Please pay attention to the ink level in the reservoirs; if the ink level is below 1CM as the