Epson C70 Printer Accessories User Manual


 
4 INSTALLATION MANUAL ON CISS FOR PRINTER EPSON C82/C80/C70
Enter printer nozzle inspection option (3-10-1), print nozzle test sheet. If it is ok
(3-10-2)), then can run printer. If line is missing (3-10-3), please clean the nozzle. If just
one color is missing (maybe there is air in nozzle). If it is still a little line missing after
several times cleaning, please turn printer off and let printer stay turned off for one hour
or more. Please contact local distributor if still have problem.
Pic.3-10-1 Pic. 3-10-2, 3-10-3
IV. Notice
It requires to change cartridges while printing (4-1-1) and ink light flash (4-1-2).
Press ink button to move out cartridge holder. Press chip reset button for 3 seconds (4-
1-3), repress ink button to move back cartridge holder, then ink amount shows 99%
again. Redo nozzle inspection and printer can run normally if it is alright. (Black and
other colors can be handled by the same method).
Note: Distinguish two kinds of chips (4-1-4). The manipulation is the same. The
difference is that the chips with transferred switch should be switched downwards (4-1-
5), otherwise, chips can not be recognized.
Pic. 4-1-1 Pic. 4-1-2 Pic. 4-1-3
Pic. 4-1-4 Pic. 4-1-5