Filter
Top Products
2
Safety Instructions
R4C4450 Setup G.
Rev. C
A5 size SAFETY.FM
7/18/00 Pass 0
L
Proof Sign-off:
ABE K.Tsuno H.Kimura_______
H.Kimura _______
ABE J.Holmes _______
❏
Never force the printer’s components into place. Although the
printer is designed to be sturdy, rough handling can damage
it.
❏
When handling the toner cartridges, always place them on a
clean, smooth surface.
❏
Do not attempt to modify or take apart the toner cartridge. It
cannot be refilled.
❏
Try not to touch the toner and avoid all contact with your eyes.
❏
Do not dispose of the used toner cartridges, fuser oil roll, or
waste toner collector in fire, as they can explode and cause
injury. Dispose of them according to local regulations.
❏
Do not use a toner cartridge for at least one hour after moving
it from a cool to a warm environment.
❏
Keep the fuser oil roll horizontal at all times. Do not tilt it or
lean it against something, as it can cause oil leakage and
reduce print quality.
❏
When removing the photoconductor unit, avoid exposing it
to room light any longer than necessary. The unit contains a
light-sensitive drum, which is the green cylinder that can be
seen through the openings to the unit. Exposure to light can
damage the drum, causing dark or light areas to appear on
the printed page and reducing the service life of the drum. If
you need to keep the unit out of the printer for long periods,
cover it with an opaque cloth.