Filter
Top Products
52
Installing the Printer Software
R4C4450 Setup G.
Rev. C
A5 size SAFETY.FM
7/18/00 Pass 0
L
Proof Sign-off:
ABE K.Tsuno H.Kimura_______
H.Kimura _______
ABE J.Holmes _______
❏
If you are running DOS, you must use a driver other than the one
included with the printer. see “For DOS Programs” on page 56.
For All Windows Users
Follow these steps to install the printer driver for Windows 95,
98, NT 4.0, Windows 3.1, or NT 3.51.
Note:
When you use your printer on a network, you need to have approval from
the network administrator. Ask your network administrator for more
information, or see the Administrator's Guide.
1. Make sure that the printer is off and Windows is running.
2. Insert the CD-ROM that comes with your printer into your
CD-ROM drive (this is usually the D: drive).
Note:
Step 3 and 4 are needed only for Windows 3.1 and NT 3.51.
Windows 95, 98, NT 4.0 are executed automatically.
3. Click
Start
, then choose
Run
.
For Windows 3.1, open the Program Manager window, then
choose
Run
from the
File
menu.
4. Type
D:\EPSETUP
; then click
OK.
(If you have inserted the
CD-ROM in a drive other than the D: drive, substitute the
appropriate drive letter).