Filter
Top Products
Control panel
Name Function
A
Status indicators
The color of the indicators and whether they are flashing
or lit indicate the status of the projector. s p.80
B
[t] button
Turns the projector power on or off. s Quick Start Guide
C
[Source Search]
button
Changes to the next input source that is connected to the
projector and is sending an image. s p.16
D
[Enter] button
If pressed during projection of computer signal images, it
automatically adjusts the Tracking, Sync., and Position to
project the optimum image.
When a Configuration Menu or a Help screen is displayed,
it accepts and enters the current selection and moves to the
next level. s p.57
Name Function
E
[w][v] button
Corrects Keystone distortion. In the following cases, these
buttons have the [
] and [ ] functions.
- When the projected image is being sent through a
Network connection
- When the Slideshow function is being used for
projection
If pressed when a Configuration Menu or a Help screen is
displayed, these buttons select menu items and setting
values. s Quick Start Guide , p.57
F
[Help] button
Displays and closes the Help screen which shows you how
to deal with problems if they occur. s p.79
G
[Esc] button
Stops the current function.
If pressed when a Configuration menu is displayed, it
moves to the previous menu level. s p.57
H
[a][b] buttons
Adjusts the volume. If pressed while a Configuration
Menu or a Help screen is displayed, these buttons have the
[
] and [ ] functions to select menu items and setting
values. s Quick Start Guide , p.57
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of
hearing. Always lower the volume before powering
off, so that you can power on and then gradually
increase the volume.
I
[Menu] button
Displays and closes the Configuration Menu.
s p.57
Part Names and Functions
12