Filter
Top Products
Procedure
A
Turn the computer on.
B
Connect to the power cable (supplied).
C
Turn the projector on.
D
Open the A/V mute slide.
E
Connect to the USB cable.
To output audio from the projector's speaker, connect an audio
cable (commercially available) to the Audio2 Port.
s "Connecting for the first time" p.19
s
"From the second time" p.21
Attention
Connect the projector directly to the computer and not via a USB hub.
Connecting for the first time
When connecting for the first time, you need to install the driver. The
installation procedure differs for Windows and Mac OS.
Procedure
For Windows
A
Driver installation starts automatically.
When you are using Windows 2000, double-click My Computer -
EPSON PJ_UD - EMP_UDSE.exe, on your computer.
When using a computer running Windows 2000 under user
authority, a Windows error message is displayed during installation
and you may not be able to install the software. In this case, try
updating Windows to the latest version, restart, and then try to
connect again.
For more details, contact the nearest address provided in the Support
and Service Guide.
s Epson Projector Contact List
B
Click "Agree".
If the driver is not installed, you cannot start USB Display. Select
Agree to install the driver. If you want to cancel installation, click
Disagree.
Connecting with a USB Cable and Projecting (USB Display)
19