Filter
Top Products
Press the [ ][ ][ ][ ] buttons on the remote control or the [w][v]
[
a][b] buttons (or the [Wide][Tele]) on the control panel. Use the buttons
to move the cursor to the desired key, and then press the [
] button.
Enter figures by holding down the [Num] button on the remote control,
and pressing the numeric buttons. After inputting, press Finish on the
keyboard to confirm your input. Press Cancel on the keyboard to cancel
your input.
• Each time the CAPS key is selected and the [ ] button is pressed, it
sets and changes between upper case and lower case letters.
• Each time the SYM1/2 key is selected and the [
] button is pressed, it
sets and changes the symbol keys for the section enclosed by the frame.
The following text can be entered.
Numbers 0123456789
Alphabet ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
Symbols ! # $ % & ' ( ) + - . / < = > ? @ ^ _ ` { | } ~
a
• Except for the SSID, colons and spaces cannot be entered on the
Network menu.
• Some symbols (" * , ; [ \ ]) cannot be entered using the software
keyboard. Use your Web browser to enter the text.
s "Changing Settings Using a Web Browser (Web Control)" p.87
Basic menu
Submenu Function
Projector Name
Displays the projector name used to identify the projector when
connected to a network.
When editing, you can enter up to 16 single-byte alphanumeric
characters. The following characters cannot be used: " * + , / ; < =
> ?[ \ ] ` |
PJLink Password
(Except for EB-S29/
EB-S27)
Set a password to use when you access the projector using
compatible PJLink software. You can enter up to 32 single-byte
alphanumeric characters.
List of Functions
110