Filter
Top Products
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected. Depending on the model used, some input
sources are not supported.
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.32
Submenu Function
Projector Info
You can display the following information.
• Lamp Hours
*
• Source
• Input Signal
• Resolution
• Video Signal
• Refresh Rate
• Sync Info
• Status
• Serial Number
• Event ID
Submenu Function
Version
Displays the projector's firmware version.
*
The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
Reset Menu
Submenu Function
Reset All
You can reset all items in the Configuration menu to their default
settings.
The following items are not reset to their defaults: Input Signal,
User's Logo, Lamp Hours, Language, Password, User Button,
and all items on the Network menu.
Reset Lamp
Hours
Clears the cumulative lamp hours use time. Reset when you
replace the lamp.
List of Functions
95