Filter
Top Products
17
Adjusting the Projection Screen
Basic Operations
Adjusting the tilt of the projector
Displaying a test pattern
Extend
Extend
Retract
Retract
When an image from the projector that is placed on a flat surface is tilting horizontally ( ), use the
front feet to correct the tilt.
You can adjust zoom, focus, and color without having to connect video equipment.
Press on the remote control to display the menu. To carry out zoom or focus adjustment or
adjustment of the projection position using the lens shift function, select "Display Position" and then press
. When carrying out color adjustment, select the color to be adjusted from "Color Isolation: R/G/B" and
then press . For example, if you select "Color Isolation: R" only the red component of the image will be
projected, as if you view images through a red filter which is provided with a commercially-available
monitor checking disk. In this condition, you can adjust the color saturation and tint in the same way as the
adjustment method described on the monitor checking disk. Since you do not have to hold a color filter,
you can make color adjustments much easier.
1/2H
1/2V
To stop displaying the test pattern, press to display the menu then select "Exit".
Adjusting the tilt of the projector
Displaying a test pattern
When "Display Position" is selected