Filter
Top Products
12
User’s Guide
Before Using the Remote Control
Inserting the Batteries
The batteries are not already inserted into the remote control at the time the
projector is purchased. You will need to insert the batteries that are
provided with the projector before the remote control can be used.
PROCEDURE
Remove the battery cover.
While pushing the catch of the battery compartment cover, lift
the cover up.
Insert the batteries.
Check the positions of the (+) and (–) marks inside the battery
holder to ensure that the batteries are inserted the correct way.
Replace the battery cover.
Press the battery compartment cover until it clicks into place.
CAUTION
Make sure you read the separate Safety Instructions/World-Wide
Warranty Terms before handling the batteries.
1
Catch
2
3
TIP
If delays in the responsiveness of the remote control occur or if it does
not operate after it has been used for some time, it probably means
that the batteries are becoming flat. Have two spare AAA-size alkali
batteries ready to use when required.