Filter
Top Products
Using the Projector
■ ■ ■ ■
26
If you need to raise or lower the image on the screen, extend
or retract the two feet at the bottom of the projector as
follows.
1. Stand behind the projector and support the front of it
while you lift the foot adjuster lever located above the feet.
This unlocks the feet so they can move up and down
freely. Do not let the projector drop.
♦
Caution:
Do not hold the projector by the lens as you may
damage it.
2. While lifting the foot adjuster lever, raise or lower the
projector until the screen image is positioned correctly.
3. Release the lever to lock the feet in their new position.
4. To fine-tune the height of the projector, turn the rear feet
clockwise to raise the height or anti-clockwise to lower it.