Filter
Top Products
Focusing and Positioning the Screen Image
■ ■ ■ ■ ■
■
29
Using the Remote Control
To use the remote control, point it towards the remote
control receivers located at the front and back of the
projector.
To be able to use the remote control as a cordless mouse,
connect the mouse cable (for PS/2) to the projector and your
computer.
You can use the remote control up to 10 metres (33 feet)
from the projector.
♦
Note:
The projector may not respond to remote control
commands in these conditions: ambient light is too bright; a
certain type of fluorescent light is present; a strong light source
(such as direct sunlight) shines into the infrared receiver; or
other equipment emitting infrared energy is present (such as a
radiant room heater). Correct these conditions to use the remote
control or control the projector from a computer.
♦
Note:
If you use the other mouse except the PS/2 mouse, you need
to purchase the Link Set to connect.
Menu
1
2
4
5
3
- Volume +
Power
Source
Effects
Resize
Help
Custom
Freeze
AV/Mute
bottom
multi-purpose
button
top
multi-purpose
button
pointer button
Remote control