Filter
Top Products
14-Function list
Configuration Menus
fSetting menu
Sub menu Function
Screen Position Moves the image display position vertically and horizontally.
• Press the [e] button and adjust the display area on the Position adjustment screen which
is displayed.
Zoom
Caption
Adjustment is possible only when the Zoom aspect function has been selected.
• Vertical size : You can adjust the vertical size of the image.
• Zoom Position: You can adjust the vertical movement of the display position.
Keystone Corrects vertical keystone distortion in the image.
• The projected image changes when keystone correction is carried out.
• If the images become uneven in appearance after keystone correction has been carried
out, decrease the sharpness setting.
Projection • Front : Image is displayed, as is. No vertical/horizontal reversal performed.
• Front/Ceiling: The image is displayed vertically reversed.
• Rear : The image is displayed horizontally reversed.
• Rear/Ceiling : The image is displayed vertically and horizontally reversed.
Setup Level You can select one of two preset black levels.
(When the image source is an NTSC Video/S-Video signal, or when the image source has
been set to Input A, "Component".)
Operation Sleep Mode Sets the energy saving option for when no signal is being input.
• When a Sleep Mode interval has been set, the projector will enter Sleep Mode when no
operation has been carried out for the set time (5, 10 and 30 minutes). Projection will shut
down and the projector enters a standby state after cooling down. (The power indicator
lights orange).
• Projection starts again when the [Power] button is pressed on the projector's contol panel
or the remote control.
Child Lock Sets child lock to ON or OFF.
When child lock is set to "ON", the power will not come on unless you press and hold the
[Power] button on the control panel for at least 3 seconds. (The remote control functions as
normal.)
On Screen
Display
Message When set to "OFF", messages such as "No Signal.", and the name of the selected input
source or colour mode will no longer be displayed. Warning messages such as "Replace the
lamp" will continue to be displayed.
Background
Color
Sets the background colour to black or blue.
Startup
Screen
Sets whether or not the "EPSON" logo will be displayed during projector startup.
Input
Signal
Video
Signal
Selects the colour system of the video signal being input.
(Changes in signal format will only be noticeable when the input source is Video/S-Video.)
Input A You can switch between the sources connected to Input A.
• Component: YCbCr
g/YPbPrg
• RGB-Video: SCART
g, Sync on Green
Volume Adjusts the volume setting
Language Selects the language in which on-screen messages are displayed.
• Press the [e] button and select the desired language from the list which is displayed.
Reset Resets all the adjustment values within the "Setting" menu (except for "Child Lock",
"Input A" and "Language") to their default settings.
• Press the [e] button and select "Yes" on the confirmation screen which is displayed.