Filter
Top Products
Setup
Setting up your fax board is a four-step process:
1.
Set the DIP switches on the board.
2.
Install the board in your printer.
3.
Plug the appropriate cables into the board.
4.
Perform a self test.
Before you install your fax board, you need to make a number
of choices about how your fax board will work. Read the
descriptions below, make your choices, and then proceed with
your setup.
Fax reception modes
This board has three fax reception modes:
o
Automatic reception-it starts to receive a fax when the
ring signal is detected.
o
Selective reception-it starts to receive a fax either 15 or
30 seconds after it detects a ring signal (depending on the
setting you select).
o
Manual reception-you have to use software or press the
manual reception button to receive a fax.
2
Setup