Filter
Top Products
1. Make sure paper is loaded, then turn off the printer. While
holding down the
Font
button, press the
Operate
button
to turn on the printer. The printer enters the default-setting
mode and prints the language selection sheet.
2. Press the
Font
button until the
Font
lights indicate the
language you want, as described on the language selection
sheet.
3. Press the
Tear Off/Bin
button to print the default-setting
mode instruction sheets (three pages) in the language you
want.
Note:
The arrows on the instruction sheets indicate the printer’s current
settings.
4. Press the
Font
button until the
Font
lights indicate the option
you want to change, as described on the default-setting mode
instruction sheets.
5. Press the
Tear Off/Bin
button until the
Condensed
and
Tear Off/Bin
lights indicate the setting you want, as described
on the instruction sheets.
6. Repeat steps 4 and 5 to make any other settings you want.
Each time you press the
Tear Off/Bin
button, the printer
saves the settings you selected.
7. When you finish changing the settings, press the
Operate
button to turn off the printer and exit the default-setting mode.
4
R
Adonis Rev.E
A5 size Chapter 4
97/04/07 pass 0
Using the Control Panel
4-15