Filter
Top Products
R4C474Setup Guide
Rev_C
A5 size SETUP.FM
3/24/00 Pass 0
L
Proof Sign-off:
Gazan, CRE Tsukada_______
N.Nomoto _______
_______
Checking the Printer
Before printing your first page, you need to make sure the printer is working
correctly by printing a nozzle check page and, if necessary, cleaning the
print head.
Loading paper
Follow these steps to load plain paper in the printer.
1. Lower the output tray and slide out the extension. Next, slide the left
edge guide so that the distance between the edge guides is slightly
wider than the width of your paper.
2. Fan a stack of paper, then tap it on a flat surface to even the edges.
3. Load the stack of paper in the sheet feeder with the printable side up
and the right edge of the paper resting against the right edge guide.
Then slide the left edge guide against the left edge of the paper.
Note:
❏
Always load paper into the sheet feeder short edge first.
❏
Make sure the paper stack fits under the arrow mark inside the edge guide.
edge guide
output tray
printable
side up