Filter
Top Products
R4C624Setup Guide
Rev_C
A5 size SETUP.FM
6/15/00 Pass 0
R
Proof Sign-off:
M.Otsuka, CRE M.Moriyama_______
N.Nomoto _______
_______
Installing the Printer Software
After connecting the printer to your computer, you need to install the
software included on the “Printer Software for EPSON Stylus Photo
2000P” CD-ROM shipped with your printer.
Your printer software includes:
❏
Printer driver and utilities
The printer driver runs, or “drives,” your printer; use it to make
settings such as Print Quality, Media Type, and Paper Size. The
Nozzle Check, Head Cleaning, and Print Head Alignment utilities
help you keep your printer in top operating condition. EPSON
Status Monitor 3 (for Windows) or EPSON StatusMonitor (for
Macintosh) notifies you of printer errors and displays printer status
information such as the amount of ink remaining. The Status
Monitor also guides you through the ink replacement process.
❏
Online guides
The online
Reference Guide
and
Color Guide
help you learn more about
your printer and color printing.
If you are using the floppy disk version of the software, make a backup
copy of the EPSON printer software disk before you begin installation.
If you wish to make a floppy disk version of the printer software on your
CD-ROM, you can use the driver disk creation utility included on the
CD.
Installing in Windows
Follow these steps to install your printer software.
1. Make sure that your printer is off.
2. Turn on your computer and start Windows. If the New Hardware
Found screen or any other wizard appears, click
Cancel
.
3. Insert the printer software CD shipped with your printer in the CD-
ROM drive. The Installer dialog box appears. (For floppy disk users,
insert the disk in a disk drive and double-click the
My Computer
icon, then the floppy disk drive icon, and then
Setup.exe.
)
Printed in Japan 00.xx-xx
Copyright© 2000 by SEIKO EPSON CORPORATION, Nagano, Japan.