Filter
Top Products
Buttons
Operate
Press this button to turn the printer on or off.
Pause
Press this button to temporarily stop printing and to resume
printing. Holding it down for at least 3 seconds when the printer
is in the standby mode enables the micro adjust function. Pressing
it again disables this function. See “Micro Adjust” later in this
chapter for details.
Load/Eject
Press this button to load single-sheet or continuous paper to the
loading position. However, the printer normally loads paper
automatically. If single-sheet paper is already in the loading
position, use this button to eject the sheet. If continuous paper is
in the loading or tear-off position, press this button to feed it
backward to the standby position.
LF/FF
(line feed/form
feed)
Press this button briefly to feed the paper forward one line. Hold
the button down to eject a single sheet of paper or advance
continuous paper to the top of the next page. You can also use this
button to load a single sheet of paper from the cut-sheet feeder or
to feed continuous paper from the standby position to the loading
position.
Tear Off /Bin
Pressing this button moves a page to the tear-off position, and
pressing it again moves the next page to the top-of-feed position.
When cut sheets are used, pressing it selects the cut-sheet feed bin
number. Use the Card mode (Bin 1 selected) to print on postcards.
3-4
using the Printer